In Stock Refurbished Equipment

• Heat Sealing Area - 18 in. X 30 in. (45.7cm x 76.2cm)
• Tool height opening up to 4.5”; others on request
• Manually operated DUAL aluminum shuttles, clear anodized, on smooth 1” dia. stainless shafts w/non-lube linear bearings
• Two hand Banner Opti-touch safety rated sensors (not single button) per OSHA 1910.212 & 1910.144 requirement, ergonomically correct positioning
• Emergency stops, includes stationary safety shields yellow/red meet CE, UL, CSA, OSHA, ISO13850 (NEW)
• Heating Elements - 240v or 480v, Flat 1” heat plate w/internal heaters, 6000W
• Seal Platen – precision machined Aluminum, Dupont Teflon Silverstone coating is included (NEW)
• Electrical Requirements - 208V; 220/240v; 380v, 480v, w/1ph or 3ph available (TO BE DETERMINED SOON)
• Sealing Pressure adjustable to over 10,000+ pounds, precision stationary nickel plated steel surface plate for correct support of tooling shuttle
• Air reservoir included; 4.7 gallon ASME rated; includes required ASME pressure relief safety valve (NEW)
• Air Dump Safety valve, OSHA approved, tag out/lock out.
• Floor Space – 45”W x 75”L (114cm x 190cm); no wasted  space compared to carrousels 
• Machine mounted swivel non-mar casters w/height adjustment & brakes
• Rigid welded 3/16” steel tubular framework w/special powdercoat white.
• NEMA 12 enclosure (NEW)
• Components compliant with IEC 60204-1, CE/CSA/UL as applicable to touch protection.
• Stainless steel physical operator guards on Auto Shuttle models. Guarding meets OSHA 1910 sub-part 0, 1910.145, EN415-1 & -3.
• Stainless steel shelving at operator eye level for convenient staging of packaging materials
• Quick change lift off tooling shuttles to provide versatility and productivity; includes SS locator pins for tooling plates. Includes extra shuttle plate mounting holes to fit standard AV 15:18 tooling (2) on each shuttle as well as our standard 18:30 tooling. Clear anodized surfaces.
• Inlet air filter (5 micron) included, ¾” NPT ready for non-regulated supply air connection
• Single exhaust port with 20 micron filter or for connection to discharge line from room. Sound levels comply with OSHA 1910.95
• Sealer is ready for operation upon connection to air and electric power. 
• Weight - 1490 pounds (667 kg); 2.72 lb/sq.in. of seal area; built to be rugged, durable (not made of angle and sheet metal), check the weight/sq. in. of seal area on other brands.

• Mitsubishi FX3u PLC (NEW)
• Beijer E1032 touch screen (1) operator interface terminal (OIT-HMI); stores multiple recipes, requires ID/PW sign-in 
• On-screen programmable Time and Temperature controls w/alarm limits is standard (NEW)
• Individualized operator (optional), supervisor/engineer or calibration unique sign in ID/PW for assigned access levels
• Printer port for PCL5 output for UDI data, cycle data, etc. (NEW)
• Odometer and resettable cycle counter. (NEW). 
• Redundant automatic heater over temperature safety cutoff control circuit, Factory Mutual approved controller, 300F cutoff standard (NEW)
• Electronic process monitoring with temperature & air pressure sensor fail-safe alarms for parameter recipe settings, PW protected.
• Four (4) dual lead special grade thermocouples for control feedback & accurate individual temperature displays on OIT while providing signals to calibration ports for simultaneous reading, PW protected. (NEW)
• Individual thermocouple calibration connectors (4). On screen calibration of each (4) thermocouples. (NEW)
• Alarm screen details and alarm warning.  Alarm screen history (10-20 lines).
• Low profile Banner alarm light for recipe parameter alarms. (NEW)
• Pressure regulation w/precision manual adjustment & liquid filled precision gauge as well as digital readout on screen (SEE UPGRADE BELOW)
• Pressure calibration port for easy gauge connection to pressure circuit (1). On- screen calibration of pressure circuit.
• Timer calibration connector (1) 24vdc signal. (NEW)
• Eye level controls including HMI screen, reset(s) and others.
• English units of measure readouts.
• Password protection for validated recipes & calibration screen
• Air Usage - .35 CFM @ 80 PSI at 4 cycles per minute. Supply @ 100psi with 1/2”+ dia line minimum.

1. Auto Shuttle System; electrically operated for extremely smooth cycle, single speed with gentle acceleration and deceleration of shuttle.  Interlocked with Banner hand sensors for safe platen operation. Reduces operator repetitive motion fatigue and harsh displacement of tray contents.
2. Upgrade from standard manual pressure regulator.  Auto Pressure Regulator Process      Control System including additional programming to Mitsubishi PLC & Beijer operator interface, pressure transducer using I/P transmitter for automatic programmed fine air pressure closed loop control with PLC controlled auto regulator though OIT screen setting. Always includes AV standard digital pressure and temperature monitors with alarm system on OIT/HMI. Provides Auto Air Pressure  Control settings on the screen in lieu of standard manually set regulator. (NEW)

Why buy used equipment with obsolete controls?  Why spend all that time validating a deadend used sealer? Buy factory refurbished and get 1 year warranty on all new components from Atlas Vac at about 60% the price of new.  Fully calibrated and with current equipment manual. We build these to be like new for a long production life.

**Return to Top of Page**